Water Condensation Drainage - Honeywell MF08CESWW Manuel Du Propriétaire

Water Condensation Drainage

When there is excess water condensation inside the unit, the air conditioner stops running and
shows a warning light (refer to diagram below). This indicates that the water condensation needs to
be drained using the following procedure:
1. Unplug the unit from power source.
2. Place a shallow pan under the drain plug. See diagram.
3. Remove the drain plug.
4. Water will drain out and collect in the tray.
5. After the water is drained, replace the cap firmly.
6. You can now turn on the unit.
Temperature and Time Setting Indicator Display
WATER CONDENSATION DRAINAGE
O/I
MODE
Power Control
Mode Indicator Light
Receiving Sensor
ALARM
Warning Light
Drain
Plug
Shallow Pan
(Not included)
14