The deep fryer is equipped with an integrated drain system. Draining the appliance can
be done very safely: the container, constructed of a single stamped and bevelled piece,
allows oil to drain directly without handling of the deep fryer.
To turn on the fryer, just turn the thermostat control knob (n°3 on picture) on the wished
position, the orange pilot light (n°2 on picture) switches on until the fryer reached the
selected temperature.
Fill in the basket (n°4 on picture) and plunge it slowly into oil
On/off pilot light
1
3
Thermostat
5. FUNCTIONING / MANIPULATION
a) Installation / assembly:
- Unpack carefully the device of its packaging.
- Remove the protective film around the machine
- Place the fryer on a solid, plane and heatproof surface.
- Never place the device near a wall or near a partition makes of combustible materials
even if it is very well isolated.
- A distance of minimum 10 cm with the partition or the wall is necessary.
- Place the product to enable easy access to the plug.
2
1
Thermostatic pilot light
2
4
Basket
3
4
18