Publicité
7. Avoid places subject to shock or vibration.
A device such as a contact breaker may be a vibration source. Set the Power Supply as far as
possible from possible sources of shock or vibration.
8. If the Power Supply is used in an area with excessive electronic noise, be sure to separate the
Power Supply as far as possible from the noise sources.
9. Don't use the product in the environment with strong electromagnetic field, corrosive gas and conductive
substance.
Precautions in Using the product:
When the product is used under the circumstance or environment below, ensure adherence to limitations of
the ratings and functions.
Also take countermeasures for safety precautions such as fail-safe installations.
1. Under the circumstances or environment which are not described in the instruction manual.
2. For nuclear power control, railway, aircraft, vehicle, incinerator, medical equipment, entertainment
equipment, safety device etc...
3. For applications where death or serious property damage is possible and extensive safety precautions are required.
4. Don't recommond using input power source with large inductance, which may cause power supply operate
unstablely.
Note: CE MARKING
CE Marking, when applied to a product covered by this handbook indicates compliance with:
Restriction Of the use of certain Hazardous Substances Directive 2011/65/EU (RoHS2)
Low Voltage Directive 2006/95/EC
EMC Directive 2004/108/EC the low voltage Directive 2006/95/EC
For further installations refer to the web link: emea.tdk-lambda.com/CA816-04-01_
1 Model name identification method
DRL 10 –24 – 1
Single phase AC Input
Rated Output Voltage
Output Power type
Series name
DRL-1 Series
INSTRUCTION MANUAL
Publicité
