Settings And Visualization Of The Set Point - cec GO'pac Manuel D'instructions

4. USER INTERFACE (continued)
Stop Program (Timer OFF) / Stop
TIME
ON
1) Press , the time display flashes.
TIME
OFF
TIME
ON
2) Press , the hours flash. Set the hours with
TIME
OFF
TIME
ON
3) Press to set the minutes with
TIME
OFF
4) Press
to confirm.
CLOCK
A orange light indicates that the Timer ON has been activated.
Note : The setting is automatically saved after 25 s without action.
Turn off the Timer (Timer ON and OFF) / Off and On
1) Press .
TIME
ON
TIME
2) Press to delete the program, the light goes out.
OFF
CLOCK
TIME
ON
3) Press .
TIME
OFF
4) Press
to delete the program, the light goes out.
CLOCK

4.4 Settings and visualization of the set point

(Wished water temperature)
In "ON" mode
Press buttons
with a precision of 1°C.
It is recommended to never surpass 30°C to avoid alteration of the
liners.
Note : While operating, just press
14
or to define the set point you wish. The setting is made
buttons.
or to see or to modify the set point.
buttons.