EUROM SL20 Cube Manuel D'utilisation page 11

5 – Cleaning and Maintenance
 If the hose is dirty, clean it with a (slightly damp) cloth before you roll it back onto the reel.
Ensure that the hose is dry when you roll it in, so that no moisture can become trapped in the
reel!
 If necessary, you can also clean the housing with a damp cloth. Do not use corrosive
cleaning agents or chemicals that damage the material! Never submerge (parts of) the reel in
water!
 Mounting the reel under cover lengthens the life span. If it is exposed to rain and sunlight,
both the metal and the plastic parts and the winding mechanism are subject to erosion, which
affects the life span.
 Never expose your reel to frost. Certainly not when there may be water in the hose!
 We recommend that you store your reel when you are not using it, and certainly outside the
season.
 If, after some time, it is difficult to roll the hose in, the spring may have lost tension. This must
then be adjusted. Contact your service point for this.
 The reel does not have any interior parts on which you can or are permitted to conduct
maintenance. In the case of faults or defects, contact your supplier or service point. Never
open the housing!
6 – Technical data
Model
Length of hose
Hose material
Housing material
Max. pressure
Water temp.
Internal. Ø hose
Tap connector
Dimensions
Weight
11
SL20 Cube
20m
PVC
PP
24 bar
0-45°C
½" (12,5 mm)
½" + ¾" female
36 x 20 x 37,5 cm.
7,7 kg.