Technical Data; Before Starting The Equipment - Pattfield Ergo Tools PE-GP 650 Traduction De La Notice Originale

4. Technical data

Mains connection: ........................................................ 230 V ~ 50 Hz
Power consumption: ................................................................. 650 W
Pumping rate max. .................................................................3600 l/h
Delivery head max. .....................................................................36 m
Delivery pressure max. ......................................... 0.36 MPa (3.6 bar)
Suction height max. ......................................................................8 m
Pressure connection: ................approx. 33.3 mm (R1 female thread)
Suction connection: ...................approx. 33.3 mm (R1 female thread)
Water temperature max. ............................................................. 35°C
L sound power level guaranteed: ..................................... 85 dB(A)
WA
Protection type: ........................................................................... IPX4

5. Before starting the equipment

Before you connect the equipment to the mains supply make sure
that the data on the rating plate are identical to the mains data.
As a basic principle, we recommend the use of a preliminary filter
and a suction set with suction hose, intake cage and non-return val-
ve, in order to prevent long priming periods and unnecessary dama-
ge to the pump as a result of stones and solid foreign bodies.
5.1 Connecting the intake line
•
Fasten the suction hose (at least approx. 19 mm (¾") plastic hose
with spiral reinforcement) to the suction connection (5) approx.
33.3 mm (R1 female thread) of the equipment either directly or via
a threaded nipple.
•
The suction hose used should be equipped with an intake valve.
If the intake valve cannot be used, a non-return valve should be
installed in the intake line.
Anl_PE_GP_650_SPK7.indb 141 Anl_PE_GP_650_SPK7.indb 141
- 141 -
GB
08.10.15 11:14 08.10.15 11:14