Profi Care PC-HT 3033 Mode D'emploi page 25

Electrical Connection
1. Unwind the mains cable completely.
2. Before inserting the plug into the socket, make sure that
the mains voltage to be used matches that of the appli-
ance. You can find this information on the nameplate.
3. Connect the appliance to a properly installed earthed
socket.
Use
Slide the switch on the handle to the desired heat / blower
setting:
Position 0 : Off
Position I : Moderate airflow and low temperature
Position II : Strong airflow and medium temperature
Position III : strong air flow and high temperature
COOL SHOT (Cold Air)
With this switch you can stop the heating process.
Hold the button down in this position according to the de-
sired interval length. When the button is released it returned
automatically to the initial position.
WARNING:
• Before cleaning remove the mains lead from the socked.
• Under no circumstances should you immerse the appliance in
water for cleaning purposes. Otherwise this might result in an
electric shock or fire.
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
Clean the housing with a soft, dry cloth without additives.
Air Intake Grill
Regularly clean the air intake grilles on the side of the
hairdryer to avoid excessive temperatures as a result of
heat accumulation.
CAUTION: Avoid damage to the housing!
If necessary, use only a fine, soft brush to remove any
impurities.
PC-HT3033_IM
Ionizing Function – Reduction of Static in Hair
The appliance is also fitted with an ionizer which gives off
negative ions with the air flow when switching on. This pro-
cess supports safe, gentle drying of hair and also promotes
a better hair structure, maximizes hair volume, provides for
a silky finish and also reduces static in the hair.
This process is particularly gentle on stressed hair.
Switch-off
Set the switch to "0" after use. Disconnect the mains plug
from the socket.
Storage
• Leave the appliance to cool down before putting it away!
• Hang the appliance up by the suspension eye.
Mains Cable
• The mains cable should only be wound up loosely.
• Never tie the cable tightly round the appliance, as over
time this may result in the cable breaking.
• Check the mains cable regularly for damage.
Cleaning
Model:..................................................................PC-HT 3033
Power supply:.....................................220 - 240 V~, 50 - 60 Hz
Power consumption: ........................................ 1650 - 2000 W
Protection class: ...................................................................
Net weight: ..................................................... approx. 0.55 kg
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This appliance has been tested according to all relevant
current CE guidelines, such as electromagnetic compatibil-
ity and low voltage directives, and has been constructed in
accordance with the latest regulations.
Technical Data
20.03.19
25