Steba E 120 Mode D'emploi page 11

Assembly:
∙ The motor base should be wiped with a damp cloth. All other parts can be rinsed
and dryed.
Attantion: In the sieve are sharp knives!
∙ Take care, that the switch is on position "0"
∙ Place the juice collector onto the motor base, the juice spout should be placed in
the curving of the motor base.
∙ Put the sieve into the juice collector. Then press the sieve without force at the edges
on the motor base until you hear a slight click sound. Take care that the sieve is not
shaky.
∙ Put the lid on the juice collector and close the locks.
∙ Ensure that the locking bow is tightly closed.
∙ Place an pulp connector under the pulp ejection. Hint: For a more easy cleaning of
the pulp container put a small plastic bag inside to collect the pulp.
∙ Place the juice collector under the spout.
Then plug in the appliance.
Usuage:
∙ When the appliance is used for the first time the motor can have a little smell,
which stops fast
∙ Switch position "I": slow speed- for soft fruits like grapes, melon, etc Switch poition
"II": high speed- for hard fruits and vegetables like apples, carrots etc
∙ Never place food with a stone or a hard skin into the feeding opening.
∙ Press the pusher slowly, without force down. Never use any other appliances or put
fingers into the feedding opening. Risk of injuries!
∙ After the last filling let the appliance work for some seconds, that the juice can
drop out of the spout.
∙ Do not overfill the pulp container, as this can cause problems during usage or even
damage the appliance.
11