Bluetooth Pairing - Michelin POWER SOURCE XR1 Guide D'utilisation

User's guide

BLUETOOTH PAIRING

Pair your Bluetooth enabled phone or tablet to the unit.
1. Press the PWR (power) button to turn on the radio.
2. Press the MODE button to change the input mode until you see "BT" on the LCD screen.
3. You will hear an elevating tone initiating the Bluetooth receiver and the "BT" text will flash
while in pairing mode.
4. Set your device (phone or tablet) to search for Bluetooth devices. Please refer to your device's
user manual for specific instructions.
5. After searching is complete, you should see "DN018BT" in the device list. Select this and the
unit will automatically connect.
6. The unit's speakers will emit a chime indicating that a successful connection has been made.
The "BT" text on the display will change from flashing to solid once connected to a device.
7. The unit is ready to be used as a Bluetooth speaker.
8. The Bluetooth setting is able to play music and receive phone calls. When a phone call is
received, press the "CH—/ " for two seconds to pick up the call. To hang up the call, press
the "CH—/ " again for two seconds. Restart the music on your device if it does not restart
automatically when the call has ended.
9. There is a small hole for the microphone that is visible near the radio on the unit.
17