Urmet 1096/310 Manuel D'utilisation page 15

INSTALLATION
Make sure that no units are powered before starting the installation procedure.
POSITIONING AND CONNECTIONS
1. Loosen the locking ring on the bracket and the screw
2. Rotate the body of the minidome for the chosen shot
3. Once made, firmly block.
4. Important note: In order to avoid serious damages to the connection cable, avoid
rotating repeatedly and excessively the camera fixed to the bracket.
5. Connect the video output to the utility.
6. Power the camera.
VIDEO OUTPUT QUICK SELECTION
The camera has the possibility to use 4 different video outputs, to be selected through 2 dip
switches placed at the end of the connection table.
ON
1 2
ON
1 2
ON
1 2
ON
1 2
TVI video output
AHD video output
CVBS video output
CVI video output