M-Audio AV32.1 Guide D'utilisation page 4

AV32.1 Subwoofer
1. Gain: Adjusts the overall output volume for the subwoofer and speakers. Press this
knob to temporarily bypass the subwoofer.
2. Optical In: Use an optical cable (sold separately) to connect to an optical source.
3. RCA Inputs: Use an RCA cable (sold separately) to connect to an RCA source.
4. 1/4" (6.3 mm) Inputs: Use 1/4" (6.3 mm) cables (sold separately) to connect an
external sound source.
5. Speaker Wire Output: Connect the included speaker wire from the speaker wire
output to the speaker wire input of the AV32.1 satellite speakers.
6. Power Switch: Use this switch to power the subwoofer and satellite speakers on
or off.
7. Voltage Selector: Change this setting only when necessary (e.g., when traveling to
a country or region with a different voltage). Selecting an improper voltage setting
can damage the unit.
8. Power Cable Input (IEC): Insert the included power cable here.
AV32.1 Remote
1. Standby: Press this button to switch the speakers and subwoofer from "Standby" to "On"
or "On" to "Standby" (if the power is switched on).
2. Sub Bypass: Press this button to temporarily bypass the subwoofer (i.e., if you are
checking how the mix sounds).
3. Vol+: Increases all speakers volume.
4. Vol-: Decreases all speakers volume.
4
1
3
2
5
4
6
8
1
4
2
7
3