Installation, Transferring Works, And Checking; Specifications - Mitsubishi Electric CITY MULTI PEFY-WP15VMS1-E Manuel D'utilisation

If malfunctions persist after you have checked the above, turn the power supply OFF and contact your dealer with information about the product name, the nature of the
malfunction, etc. If the display of "[CHECK]" and (4 digit) check code flashes, tell the dealer contents of the display (check code). Never attempt to repair by yourself.
The following symptoms are not air conditioner failures:
• The air blown out from the air conditioner can sometimes give off odors. This is due to cigarette smoke contained in the air of the room, the smell of cosmetics, the walls, fur-
niture, etc., absorbed in the air conditioner.
• The air conditioner sometimes snaps or clicks at the beginning or end of cooling/heating operation. This is the sound of friction on the front panel and other sections due to
expansion and contraction caused by temperature change. This is normal.
• The fan speed changes in spite of not changing the setting. Not to blow out cold air at the beginning of heating operation, the air conditioner automatically adjusts the fan
speed gradually from lower to the set speed. It also adjust its fan speed to protect the fan motor when return air temperature or fan speed excessively rises.

7. Installation, transferring works, and checking

Regarding place for installation
Consult with your dealer for details on installation and transferring the installation.
Caution:
Never install the air conditioner where there is a risk of leakage of flammable
gas.
If gas leaks and accumulates around the unit, fire can result.
Never install the air conditioner at the following place:
• where there is a lot of machine oil
• near the ocean and beach areas where there is salt air.
• where humidity is high
• where there are hot springs nearby
• where there is sulphurous gas
• where there is a high-frequency processing machinery (a high-frequency welder,
etc.)
• where acid solution is frequently used
• where special sprays are frequently used
• Install the indoor unit horizontally. Otherwise, water leakage can result.
• Take sufficient measures against noise when installing the air conditioners at hos-
pitals or communication-related businesses.
If the air conditioner is used in any of the above-mentioned environments, frequent
operational failure can be expected. It is advisable to avoid these types of installation
sites.
For further details, consult with your dealer.
Regarding electrical work
Caution:
• The electrical work must be undertaken by a person who is qualified as an
electrical engineer according to the [technical standard respecting electri-
cal installation], [internal wiring rules], and the installation instruction man-
ual with the absolute use of exclusive circuits. The use of other products
with the power source can result in burnt-out beakers and fuses.

8. Specifications

PEFY-WP•VMS1-E series
Item
Power source
Cooling capacity / Heating capacity
*1
Dimension Height / Width / Depth
Net weight
Airflow rate (Low-Middle-High)
Fan
External static pressure
*2
Sound level (Low-Middle-High)
*3
Filter
Notes: * Operation temperature of indoor unit.
Cooling mode: 15 °C WB - 24 °C WB
Heating mode: 15 °C DB - 27 °C DB
*1 Cooling/Heating capacity indicates the maximum value at operation under the following condition.
Cooling: Indoor: 27 °C DB/19 °C WB
Heating: Indoor: 20 °C DB
*2 The external static pressure is set to 15 Pa at factory shipment.
*3 The operating noise is the data that was obtained in an anechoic room.
6
Model
WP15VMS1-E
kW 1.7/1.9
*1
mm 200/790/700
kg 19
m /min 5.0-6.0-7.0
3
Pa 5/15/35/50
dB(A) 22-24-28
Outdoor: 35 °C DB
Outdoor: 7 °C DB/6 °C WB
• Never connect the grounding wire to a water pipe, arrester, or telephone
grounding wire. For details, consult with your dealer.
• In some types of installation sites, the installation of an earth leakage
breaker is mandatory. For details, consult with your dealer.
Regarding transfer of installation
• When removing and reinstalling the air conditioner when you enlarge your home,
remodel, or move, consult with your dealer in advance to ascertain the cost of the
professional engineering work required for transferring the installation.
Caution:
When moving or reinstalling the air conditioner, consult with your dealer. De-
fective installation can result in electric shock, fire, etc.
Regarding noise
• In installing work, choose a place that can fully bear the weight of the air condi-
tioner, and where noise and vibration can be reduced.
• Choose a place where cool or warm air and noise from the outdoor air outlet of the
air conditioner does not inconvenience the neighbors.
• If any alien object is placed near the outdoor air outlet of the air conditioner,
decreased performance and increased noise can result. Avoid placing any obsta-
cles adjacent to the air outlet.
• If the air conditioner produces any abnormal sound, consult with your dealer.
Maintenance and inspection
• If the air conditioner is used throughout several seasons, the insides can get dirty,
reducing the performance.
Depending upon the conditions of usage, foul odors can be generated and drain-
age can deteriorate due to dust and dirt, etc.
WP20VMS1-E WP25VMS1-E
~220-240V 50/60Hz
2.2/2.5 2.8/3.2
200/790/700 200/790/700
20 20
5.5-6.5-8.0 5.5-7.0-9.0
5/15/35/50 5/15/35/50
23-25-29 23-26-30
Standard filter
WP32VMS1-E WP40VMS1-E
3.6/4.0 4.5/5.0
200/990/700 200/990/700
25 25
8.0-9.0-11.0 9.5-11.0-13.0
5/15/35/50 5/15/35/50
28-30-33 30-32-35
WP50VMS1-E
5.6/6.3
200/1190/700
27
12.0-14.0-16.5
5/15/35/50
30-33-36