English - CTC VT 50 Manuel D'installation

English

Congratulations on your new product
Dear customer, thank you for purchasing our
product!
Note! Prior to the installation and using the buffer tank for the first time,
please read these instructions carefully.
This buffer tank has been manufactured in compliance with the relevant
standards and tested by the relevant authorities. Its basic technical
characteristics are indicated on the label located on the protective cover.
The buffer tank must be installed and connected by a qualified professional.
Interventions within the tank may only be done by an authorised service
provider.
The buffer tank was specially developed for the storage of hot or cold water
for heating within the limit temperatures and pressure, in accordance with the
data indicated in the "Technical data" chapter. Using the appliance in any other
way would be inappropriate and dangerous.
Note! Not suitable for potable water.
4
CTC VT 50 - 300