Cleaning Spout And Screens - Toto Kiwami Rennese TS170E Manuel D'installation Et D'utilisation

ClEaning SPouT and SCREEnS

If slightly dirty, use water and a damp cloth to wipe away the dirt
completely� If especially dirty, use cloth with dilute detergent to wipe away
the dirt, then rinse and dry it�
Do noT use acidic cleaning agents, alkaline cleaning agents, bleaches,
thinner, benzenes, cleanser, grinding powder, nylon scrubbers, or brushes�
1� Use spout key to remove
face plate adapter�
noTE: Be careful not
to cause scratches while
unscrewing the adapter�
2� Carefully take out the
screens and clean them with
a clean brush�
3� Put the o-ring, screens, and
adapter back in place on
the spout�
Spout
O-ring
Screens
Face plate adapter
loosen it
Disassembly of spout and
Brush
6
Spout key
screens for cleaning
Screen