Connection - Hexagon BPX 44 Mode D'emploi

10.2 Connection

The connection is flexible, according to the
measurement application and the various loca-
tions. All BPX boxes in use must be individually
powered. Use only one connector for data trans-
mission to the PC to ensure the synchronization
of the boxes. Choose the parallel connection for
each box instead of a series connection that is
limited to 4 boxes only.
Connection of 2 BPX boxes
Remember to use the charger provided by TESA
for the power supply.
PW = Power Supply
If only TWIN Station are used (without any BPX
box), connect them to a multiplexor USB-Hub.
Use then a single connector for data transmis-
sion from the USB-Hub to the PC, to ensure
their synchronization.
Connection of 4 BPX boxes and 2 TWIN Station
17