Bpx Station; Technical Data - Hexagon BPX 44 Mode D'emploi

7 BPX STATION

BPX is a universal electronic interface used for
connecting half-bridge probes made by TESA.
This box incorporates a multiplexer permitting a

7.1 Technical Data

Measuring range, commutable
(common to two channels)
(Indication error range of the digital output
(at 20±1°C and ≤ 50% HR
Zero point drift
(at 20±1°C and ≤ 50% HR)
Sensibility drift
(at 20±1°C and ≤ 50% HR)
Acquisition time
– between 2 subsequent measurements
– for the synchronisation
Data transfer duration
– from the serial digital output (USB)
PC ports
– USB hub
Input voltage of the power supply
Output voltage of the power supply
Rated operating temperature
Operating temperature range
Storage temperature range
Overall dimensions
BPX box weight
Degree of protection
Electromagnetic compatibility
Assembly
Probe voltage and drive frequency
Signal output for value classification
8
series connection of several boxes as well as a
monitoring of input and output signals.
±2000 µm/±200 µm
±5000 µm/±500 µm (long travel probes)
≤ ± (0.05 µm + 0.15%) of the measure
range
≤ ± 0.05 % / °C
≤ ± 0.05 % / °C
≥16 ms
≤1 ms
Depends on the operating system
of the PC
USB 2.0
3 external ports (≤100 mA)
115 to 230 V – 50-60 Hz, -10% to 15%
rms
7 V typ. at nominal load
20°C ±1°C
10 to 40°C
-10 to 60°C
55 x 172 x 155 mm (H x L x P)
1 kg
IP40 according to IEC/CEI 529, DIN 40050
Robust aluminium housing
To IEC/EN 61326-1, US to CFR 47, part 15,
subpart B, Class B digital device
Using the mounting brackets (accessory)
and the screws of the front / rear panel
2.8 V typ. – 13 kHz ±0,5%
rms
3 relay digital outputs (max. 50 V, 500 mA)