Data Processing System; Tis Software; User's Interface; Command Library - Hexagon BPX 44 Mode D'emploi

6 DATA PROCESSING SYSTEM

A single or several BPX or TWIN Station inter-
face boxes can be connected to a host computer
fitted with a USB interface.

6.1 TIS software

This software allows for a correct setting of
each peripheral device as well as both interface
boxes and probes. Running it will also enable
you to conveniently define the measuring func-
tions, capture the measured value and export
the results.
In addition, the BPX box lets the operator con-
figure the stand-alone mode (no PC) and moni-
tor the signal inputs and outputs.

6.2 User's interface

The User's interface makes it possible for the
main tabs provided with the TIS Software to be
downloaded in another programme. Running
TIS partly allows for easy control of the settings
made for both BPX and TWIN Station, including
the assignment of the measuring channels and
functions, without the need for the measure-
ment to be taken.

6.3 Command library

The command library enables a direct com-
munication with the BPX or TWIN Station. This
solution is convenient for those programmers/
integrators who want to use a proprietary inter-
face.
The port used for data transmission is a virtual
COM port.
Minimum profile requirements for used PC:
– Windows XP sp3
– .NET Framework 3.5
– Hard disk, 1GB
– Image resolution to 900 x 600 pixels
For further information about the TIS software,
please refer to the instruction manual available
on the CD-ROM delivered.
This software tool is intended for systems used
for data processing or data acquisition, which
do not provide the core structure needed to han-
dle complex measuring functions.
Additional information is available upon re-
quest.
Additional information is available upon re-
quest.
7