OK. OKR 120 Mode D'emploi page 12

EN
GENERAL SETTINGS
Time setting
The time can be set only if the radio is in off mode (Standby):
4
1. When the product is connected to the power supply for the first time, 0:00 appears on the
display in standby mode.
2. Press and hold the TIME SET / COOK TIMER button for 2 seconds.
3. Use the SKIP+/- buttons to set the hour format 12H or 24H and confirm with the TIME SET /
COOK TIMER button.
4. Now set the hours with the SKIP+/- buttons and confirm with the TIME SET / COOK TIMER
button.
5. Now set the minutes with the SKIP+/- buttons and confirm with the TIME SET / COOK TIMER
button.
6. The setting has now been completed.
Alarm setting
The alarm can be set only if the FM radio is in off mode (Standby):
ALARM 1
5
1. Press the PRE.- / ALARM 1 button for approx. 2 seconds. The alarm symbol
display and the previously set alarm function ("bell" or "radio") is displayed.
2. Set the alarm function with the SKIP+/- buttons and confirm with the PRE.- / ALARM 1 button.
3. Use the SKIP+/- buttons to adjust the settings for hours and confirm with the PRE.- / ALARM 1
button.
4. Use the SKIP+/- buttons to set the minutes, and press PRE.- / ALARM 1 to confirm.
5. Alarm1 is activated.
ALARM 2
1. Press the PRE.+ / ALARM 2 button for approx. 2 seconds. The alarm symbol
display and the previously set alarm function ("bell" or "radio") is displayed.
2. For setup, switching on/off of ALARM 2 follow the instructions as given for setup of ALARM 1. But
instead of pushing PRE.- / ALARM 1 button push PRE.+ / ALARM 2 button.
Stop alarm
1. Snooze function: Press SNOOZE / DIMMER button to suspend alarm sound for a few minutes. The
alarm will start again after approx. 9 minutes. The set alarm mode will remain flashing on the display.
2. Press PRE.+ / ALARM 2 or PRE.- / ALARM 1 to stop/cancel alarm.
IM_OKR120_170824_V03_HR.indb 12
12
flashes in the
1
2 flashes in the
24/8/17 5:20 pm