Trouble Shooting; Safety Operation - Carbest 80283 Manuel D'utilisation

UK

TROUBLE SHOOTING

Problems and symptoms
No DC output
or charger cannot startup
Battery charging not stable
Charger cannot switch to float
!

SAFETY OPERATION

If cables have to be fed through walls with sharp edges, always use tubes or
ducts to prevent damage�
Do not pull on the cables, fasten the device and cable securely� Lay the cable
so that it cannot be tripped over�
Ensure the device is standing firmly that it cannot tip over or fall down�
Children should be supervised to ensure that they do not play with the device�
Do not allow water to drip or splash on the device�
Make sure the air inlets and outlets of the device are not covered�
Operate the device only if you are certain that the hosing and connection
cables are undamaged�
Do not reverse the polarity of the connection to the battery�
Disconnect the supply before making or breaking the connections to the battery�
!
Risk of electric shock! Do not open the device if it has been
WARNING |
connected to the AC power source.
Carbest | Smart Battery Charger 80283 | 80284 | 80285
Possible cause
No AC input
Overheats shutdown Allow the device to
Loose connect of
battery terminal
Output short circuit
AC input voltage is
not stable
Not choose the cor-
rect battery type
Battery cable con-
nected to the battery
is too thin
Battery in poor
condition
16
Suggest remedy
Check the AC power
source
cool down
Check the connec-
tion between charger
and battery
Check input AC volt-
age if it is within the
input voltage range
Select the correct
battery
Change cable of
proper size
Replace new battery