Philips BT9295 Mode D'emploi page 12

English
12
0.4
1.4
3.0
6.0
3 Press the on/off button to switch on the appliance.
4 To trim your beard, move the trimming comb through the hair
slowly.
5 When you are finished, press the on/off button to switch off the
appliance.
Tips
- Always make sure that the tips of the trimming comb point in the
direction in which you move the appliance.
- Make sure that the flat part of the trimming comb is always in full
contact with the skin to obtain an even hair length result.
- Since hair grows in different directions, you need to move the appliance
in different directions (upward, downward or across).
- Trimming is easier when skin and hair are dry.
length settings
mm
0.6 0.8
1.6 1.8
3.5 4.0
7.0
cleaning and maintenance
Clean the appliance after every use.
Never use compressed air, scouring pads, abrasive cleaning agents or
aggressive liquids such as petrol or acetone to clean the appliance.
Note: The trimming head does not need any lubrication.
1.0 1.2
2.0 2.5
4.5 5.0