Loose Contact - BTR Netcom KAPRI plus Instructions De Service

8. Loose contact

If you are operating a termination unit such as wall outlet, cable or
adaptor where you supect an loose contact, KAPRi plus will help you
to detect this error. Loose contact detection requires constant
checking of the connections when the termination unit is moved.
KAPRi plus offers an additional operation mode. Terminate the unit to
be tested between the KAPRi plus Mainframe and one of the Test
Boxes (see chapter 6.2) to check for loose contact.
To activate the loose contact test mode press Start Key (D) and Step
Key (H) simultaneously when turning on the KAPRi plus Mainframe.
Now, KAPRi plus is in the loose contact test mode and is testing
continuously the 9 contacts at the connection for continuity. If the
connection of the tested unit is moved and the loose contact
interrupts wire connections, the respective LED is lighting to display
this interruption. To leave the loose contact test mode press the
Start Key.
E18