BTR Netcom KAPRI plus Instructions De Service page 35

6. Operation
Example:
interruption (error
code 3) of wires 1,
2, and 3.
press Step Key
  If installation errors are detec-
ted the conductor LED (F) of
the respective poles will light
red and the error code digit
lights in the numeric display (B).
  If more than one installation
error is detected, press the Step
Key (H) to display the other
errors.
‘ ‘ After the last error is displayed
a flashing digit is shown in the
numeric display (B). This digit
stands for the number of the
connected Test Box.
’ ’ If you press the Step Key (H)
again as long as the Test Box
number is flashing, the error list
is shown a second time, see
item   .
“ “ For repeated testing continue
as described under item ΠΠ.
The KAPRi plus Mainframe can be
turned off at any time by pressing
the Start Key.
E10