2.3 Technical data
Universal motor, radio and TV
interference suppressed
Input power
Strokes at idling speed
Strokes at normal load
Sanding stroke
Sanding pad
Abrasive – for Velcro® fastening
Hose connector diameter
Weight without mains cable and front
handle
2.4 Emissions
The values stated are emission levels. Although there is a correlation between emission and imission level, it
cannot be reliably derived from this whether additional precautions are necessary. Factors influencing the
current immission level existing at the workplace comprise the duration of exposure, the room characteristic,
other source of noise, etc. such as e.g. the number of machines and other adjacent machining operations. In
addition, the permissible immission level may differ from country to country. This information is nevertheless
suitable for providing the machine user with an improved assessment of the hazard and risk.
2.4.1
Noise emission specifications
Noise emission values determined according to EN 62841:
Sound pressure level
Uncertainty
Sound power level
Uncertainty
The noise measurement was recorded using the tool included in the standard equipment.
2.4.2
Vibration specifications
Noise emission values determined according to EN 62841-2-4 :
at the main handle smaller than 2.5 m/s
at the front handle 3.6 m/s
The measuring inaccuracy K is 1.5 m/s
2.5 Scope of supply
Orbital disk sander EVA150E 3 / EVA150E 5 complete with:
1 abrasive grid Abranet - kit, P 60 – P 320
1 protective layer ø150 57-hole
1 universal filter bag with bracket
1 edge protection
1 carrying case
230 V~, 50 Hz
350 W
12000 – 24000 strokes / min
9000 – 20000 strokes / min
3,0 mm (at EVA150E 3)
5.0 mm (at EVA150E 5)
Ø 150 mm
Ø 150 mm
35 mm (1 3/8 in.)
2,1 kg (4.6 lbs)
2
2
2
220 V~, 60 Hz
350 W
L
= 83 dB (A)
PA
K
= 3,0 dB (A)
PA
L
= 94 dB (A)
PA
K
= 3,0 dB (A)
PA
-15-