Technical Data; Emissions; Scope Of Supply - Mafell UVA 115 E Traduction De La Notice D'emploi Originale

2.3 Technical data

Universal motor, radio and TV interference suppressed
Input power
Strokes at idling speed
Strokes at normal load
Sanding stroke
Sanding pad
Abrasive – hook and loop fastening
Sanding paper - clamp fastening
Hose connector diameter
Weight without mains cable

2.4 Emissions

The values stated are emission levels. Although there is a correlation between emission and imission level, it
cannot be reliably derived from this whether additional precautions are necessary. Factors influencing the
current immission level existing at the workplace comprise the duration of exposure, the room characteristic,
other source of noise, etc. such as e.g. the number of machines and other adjacent machining operations. In
addition, the permissible immission level may differ from country to country. This information is nevertheless
suitable for providing the machine user with an improved assessment of the hazard and risk.
2.4.1 Noise emission specifications
Noise emission values determined according to EN 62841:
Sound pressure level
Uncertainty
Sound power level
Uncertainty
The noise measurement was recorded using the tool included in the standard equipment.
2.4.2 Vibration specifications
Noise emission values determined according to EN 62841-2-4 :
at the main handle smaller than 2.5 m/s
at the front handle 3.6 m/s
The measuring inaccuracy K is 1.5 m/s

2.5 Scope of supply

Orbital Sander UVA 115 E complete with:
1 delta sanding plate with Velcro
1 abrasive grid Abranet kit, P 60 – P 320
1 protective layer 115x230 10-hole
1 abrasive grid Abranet Delta 105 – P 120
2
2
2
L = 83 dB (A)
PA
K = 3,0 dB (A)
PA
L = 94 dB (A)
PA
K = 3,0 dB (A)
PA
-15-
230 V~, 50 Hz
450 W
4000 – 24000 strokes / min
3000 – 18000 strokes / min
2.6 mm (3/32 in.)
223 /112 mm (8 11/16 x 4 3/8 in.)
230 /115 mm (9 1/16 x 4 1/2 in.)
280 /115 mm (11 x 4 1/2 in.)
35 mm (1 3/8 in.)
2,6 kg