Télécharger Imprimer la page

Honeywell ES800 Série Mode D'emploi page 4

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
USE & OPERATION (CONTINUED)
FUNCTION BUTTONS
POWER
Connect the power adapter to the cooler and to the electrical outlet. Press the
unit on. The cooler will start automatically at low speed. To turn the unit off, press the button again.
COOL
Press the
button to select Cool mode.
Please make sure the water tank is filled with water above the minimum level mark. Pressing the
COOL
indicator light on the display screen activates evaporative cooling. The water pump will
operate and you will feel the cooler air after the Honeycomb Cooling Media is completely wet.
Note: When the cooling function is switched OFF, the unit can still function in a fan only mode
(without evaporative cooling).
SPEED
Press the
button repeatedly to change the fan speed between
When AUTO is selected, the wind speed will gradually decrease and increase between the TurboBlast
and QuietSleep fan speeds.
QUIETSLEEP/ TURBOBLAST
Press the button to select either QuietSleep or TurboBlast modes. QuietSleep mode minimizes wind
speed for lower airflow. TurboBlast mode blasts wind at high speed for stronger airflow.
TIMER
Press the
button until the desired time duration setting is selected. When the set time has passed,
the unit will automatically turn off (unit remains in Standby mode until power cord is unplugged from
electrical socket). The TIMER function allows you to program the unit for up to 7.5 hours of use.
SWING
Press the
button until the SWING
the display screen. The louvers will begin to move left to right automatically.
/
indicator light is illuminated on
EN
3
button to turn the
-
-
-
.
MOVEMENT
LOUVER

Publicité

loading