Kongskilde KF12 Instructions De Montage Et Mode D'emploi page 8

each other. By adjusting the plates
in porportion to each other the air
resistance can be adjusted in such
a way that no vaccum will be availa-
ble in the material outlet of the cy-
clone.
Technical data:
Max. cleaning capacity (barley), ton/h
Motor output, kW (hp)
Motor speed, rpm.
Weight (incl. motor), kg
Type of motor
Pipe dimension of fan
Max. recommended pipe lenght at
the fan outlet*, m
*) Horizontal pipe incl. 2 pcs. 90°
bends and 1 cyclone.
The data stated will apply for 50
Hz. The pre-cleaner is also availa-
ble for 60 Hz.
8
Adjustment of the
pre-cleaner
The cleaning process can be ad-
justed by the handle on the air regu-
lator of the fan.
KF 12 KF 20
12
0,75 (1,0) 1,5 (2,0)
3.000 3.000
75
Standard flanged motor
OK160 OK200
25
(OK160) (OK200)
Turn the handle till „whole grains"
are coming out.
Then push the handle slowly to the
position, being suitable for the job.
Check at some intervals the sepa-
rated material and adjust if neces-
sary.
KF 40
20 40
5,5 (7,5)
3.000
105 250
Ø300
15 15
(Ø300)
KF 60
60
7,5 (10)
3.000
260
Ø300
15
(Ø300)