Würth 0715 58 710 Traduction Des Instructions De Service D'origine page 14

1.1.2. Definitions of the measurement categories
Measurement category IV corresponds to measurements taken at the source of low-voltage installations.
Example: power feeders, meters and protection devices.
Measurement category III corresponds to measurements on building installations.
Example: distribution panel, circuit-breakers, machines or fixed industrial devices.
Measurement category II corresponds to measurements taken on circuits directly connected to low-volt-
age installations.
Example: power supply to domestic electrical appliances and portable tools.
2.1. Delivery condition
Check completeness of the delivery against your order.
• Multilingual user manual on paper
• 1 set of measurement leads (one black and one red)
• 1 carrying bag
• 1 test certificate
2.2. Functions
The 0715 58 710 is clamp-on multimeter measuring electrical and physical quantities and grouping the
following functions:
Functions
Measuring AC voltage
DC voltage measurement
Measuring AC current
Measuring DC current
Measuring resistance
Continuity test with buzzer
Zero mode/"Delta" function
"Peak" function
Auto range
Auto stop
Storage
Hazardous voltage warning
14
2. INSTRUMENT OVERVIEW
0715 58 710
▯
▯
▯
▯
▯
▯
▯
▯
▯
▯
▯
▯