Würth 0715 58 710 Traduction Des Instructions De Service D'origine page 13

Thank you for purchasing a 0715 58 710. For best results from your current clamp:
• read this user manual carefully,
• comply with the precautions for use.
1.1. Precautions and safety measures
This device is compliant with safety standard IEC 61010-2-032, the leads are compliant with IEC 61010-031
for voltages up to 600 V in category III.
Failure to observe the safety instructions may result in electric shock, fire, explosion, or destruction of the instru-
ment and of the installations.
1.1.1. Symbols
WARNING, DANGER! The operator should refer to this user's manual whenever this danger symbol
appears.
Earth
Equipment protected throughout by double or reinforced insulation.
Application or withdrawal authorized on bare conductors carrying dangerous voltages. Type A current
sensor as per IEC 61010-2-032.
The rubbish bin with a line through it indicates that, in the European Union, the product must undergo
selective disposal in compliance with Directive WEEE 2002/96/EC. This equipment must not be treated
as household waste.
The CE marking indicates conformity with European directives, in particular LVD and EMC.
Battery
Alternating current
Direct current
AC or DC
Important instruction
1. GENERAL INSTRUCTIONS
13