Télécharger Imprimer la page

habitat et jardin VITO 2 Mode D'emploi page 6

Publicité

Les langues disponibles

Les langues disponibles

Place one foot on the hoverboard's pedal. The
lights is on and the balance system is activated.
Lift your other foot and place it on the
hoverboard's pedal.
If the light is not on, or if an alarm sounds when
you step on the hoverboard, switch it off and
try again.
Once you have got your balance, lean slightly
forwards to move forwards. The more you lean
forwards, the faster you will move. Avoid
sudden movements!
If you lean backwards, the hoverboard will
move backwards.
Press the right pedal forward to turn left,Press
the left pedal forward to turn right.
Make sure you do not move sideways on slopes, as this may cause you to lose your
balance.
Relax your feet and slightly lower your centre of gravity when you ride the
hoverboard. This will make it easier to keep the balance.
Stand up and keep still on the hoverboard before getting off. First move one foot
down onto the ground behind the hoverboard and once you are standing securely on
the ground, remove your other foot from the hoverboard.
Switch the hoverboard off using the on/off button. If you do not switch off the
hoverboard, it will automatically lock after a short period to avoid unintentional
starting. Unlock the hoverboard again to continue using it.
Built-in safety functions
If the hoverboard registers a fault or failure, a built-in safety program will intervene.
This may happen in the following circumstances:
If the hoverboard leans forward or backward more than 10 degrees or if it tilts for

Publicité

loading

Ce manuel est également adapté pour:

1408 99300