Publicité
Les langues disponibles
Les langues disponibles
Do not modify the hoverboard in any way. If you need to repair the hoverboard, only
use original parts.
USE INSTRUCTION
Charging
The hoverboard must be charged fully prior to initial
use. The hoverboard must then be charged at least
whenever only one block is shown on the battery
indicator.
If necessary, allow the battery to cool before
charging. Use the charger provided only.
Charge the battery indoors at a temperature
between 0 and 40°C.
Open the cover over the charging socket on the hoverboard. Check that the charging
socket is completely dry.
Insert the plug from the charger into the charging socket. It can only go in one way.
Plug the charger into the main socket.
The indicator light will show a red light whilst the hoverboard is charging. Once the
hoverboard is fully charged after about 2 hours, the indicator light on the charger
will turn green. Unplug the charger from the socket immediately, otherwise the
capacity of the battery may be reduced.
The hoverboard must not be turned on or used while it is connected to the charger.
Riding
NOTE: If the pedal is not horizontal,the buzzer will sound alarm and the indicator will turn to red,
please keep the two pedals horizontal until all the indicators turn to blue, then you can stand on
both feet and start riding. Not not stand on both feet on the scooter if the pedal is not horizontal,
or serious incidents may occur.
Make sure that the hoverboard board is charged before
use.
Stand behind the hoverboard board. Switch the
hoverboard board on by pressing the power-on button.
Publicité
