Pneumax 1800 Série Instructions De Montage page 21

Transport
When moving the assembly, you must consider the weight of the device, the size of the
base, the electric motor and rod. Don't assembly loads on the rod whilst its moving.
Transport and relocation have to be done with correct safety devices.
Use the anchorage points indicated.
An accidental falls of the cylinder because of inappropriate devices to the movimentation
(or not homologated), could cause serious injury.
Codes
18A
.
MOTOR ASSEMBLY
POSITION
A
In line position
In parallel position
B
(transmission ratio: 1:1)
* Stroke definition
To avoid damage, it is important to prevent collision at the end of
the stroke of the piston. Therefore, add an additional 30mm to the
required stroke length.
Total stroke
Extrastroke Extrastroke
(15 mm) (15 mm)
Working stroke
Identification
The identification label contains next data:
Working temperature
Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice
_ _ _ _ _ _
. .
SIZE STROKE (mm)*
A Size 32 (max. 800)
32
B 40 Size 40 (max. 800)
C 50 Size 50 (max. 1000)
C 63 Size 63 (max. 1200)
Ordering code
Serial number
Electric cylinders
_ _ _ _ _
. .
BALL SCREW
A pitch 5
B pitch 10
pitch 12
C
(only Ø32)
pitch 16
D
(only Ø40)
pitch 20
E
(only Ø50)
pitch 25
F
(only Ø63)
Size and stroke
IP Rating Production date
Series 1800
MOTOR
Without motore
0000
(IP65)
... See catalogue
Ball screw pitch
19