InnoCigs JOYE ECO D16 Manuel D'utilisation page 48

INNOCIGS BATPACK – USING THE DEVICE
How to install the Batteries
Open the battery compartment. Then place the two charged AA/Ni-MH batteries in the device according to
the poles indicated. Close the battery compartment.
Note: If the LED indicator does not light up after switching the device on, make sure that you have inserted
the batteries correctly and that they have sufficient power. If the device still cannot be switched on despite
fulfilling all the aforementioned prerequisites, please contact our customer service department.
Power On / Off
Press the fire button five times in rapid succession to turn the unit on and five times to turn it off again.
We recommend that you switch off your device during transport and during long periods of non-use.
Vaping
Please select the correct operating mode and set a suitable wattage for your atomizer head. While holding
the fire button of your e-cigarette, inhale the vapor slowly and continuously through the mouthpiece of your
clearomizer. Release the fire button while exhaling the vapor.
46