Operation; General; Setting The Clock - Proline CMB23 Manuel D'utilisation

Masquer les pouces Voir aussi pour CMB23:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
 
OPERATION   
When the oven is plugged in, the display will show "0:00" and a beep will be heard. 
 
General   
• Press 
within 5 minutes by pressing 
cancel the cooking programme.   
• After the cooking time has elapsed, the oven will beep five times and return to 
the standby state. 
• When you open the door, the interior light will turn on. If the door is left open 
for approximately 10 minutes, the light will turn off.   
 
 
Setting the Clock   
1. Press 
  to set the clock in 24‐hour cycle.   
• The hour digits will flash.   
2. Turn
  to adjust the hour digits, the input hour should be a 24‐hour time value.   
3. Press 
4. Turn
  to adjust the minute digits. 
5. Press 
 
NOTE: During clock setting, if you press 
            previous state. In this case, your clock setting will not be saved.   
 
 
 
 
• Press to start a cooking programme or set speed 
cooking programme. 
• Press to confirm the setting. 
 
/Auto Menu/
Rotate this dial to select auto cook menus or select 
time or weight. 
  once to temporarily stop cooking. You can resume cooking 
, the minute digits will flash. 
  to confirm the setting. ":" will flash on the display.   
GB-11
Start/+30Sec./Confirm 
    (dial)   
, or press 
, the oven will return to the   
twice to 
 

Publicité

Table des Matières
loading

Table des Matières