RiverRidge 06-166 Instructions D'assemblage page 9

STEP 3
1. Attach 2 adjustable anchor brackets (R) to top board (1) by inserting 2 screws (K) through
holes on adjustable anchor brackets (R), then tighten to top board (1).
2. Attach 2 hinges (G) to door (9) by inserting 4 screws (F) through holes on hinges (G),
then tighten to door (9).
3. Repeat above step to assemble another 2 hinges (G) to another door (9).
STEP 4
10
D
D
1. Attach drawer left side panel (10) and drawer right side panel (11) to drawer front board (13)
by inserting cam bolts into cam lock holes on drawer left side panel (10) and drawer right side
panel (11).
2. Insert 4 cam locks (D) into cam lock holes on drawer left side panel (10) and drawer right
side panel (11), then rotate clockwise to secure cam bolts (B) in place.
3. Slide drawer bottom board (14) into grooves on drawer left side panel (10), drawer right side
panel (11) and drawer front board (13).
4. Attach drawer back board (12) to drawer left side panel (10) and drawer right side panel (11)
by inserting 4 screws (L) through holes on drawer left side panel (10) and drawer right side
panel (11), then tighten to drawer back board (12).
5. Attach knob (Q/U) to drawer front board (13) by inserting 1 machine screw (H) through hole on
drawer front board (13), then tighten to knob (Q/U).
K
K
1
R
R
D
11
D
13
F F
G
14
13
H
13
Q/U
F
F
G
9
X2
12
L
L
13
L
L