RiverRidge 06-166 Instructions D'assemblage page 11

STEP 7
1. Insert 4 wood dowels (A) into wood
dowel holes on top board (1).
2. Attach top board (1) to left side panel (2)
and right side panel (3) by inserting wood
dowels into wood dowel holes and inserting
cam bolts into cam lock holes on left side
panel (2) and right side panel (3).
3. Insert 4 cam locks (D) into cam lock holes
on left side panel (2) and right side
panel (3) then rotate clockwise to secure
cam bolts (B) in place.
STEP 8
8
6
1. Place back boards (6) on back of cabinet. Add plastic connection strip (8) between 2 back boards.
2. Attach back boards (6) to back of cabinet by inserting 18 screws (J) through holes on back
board (6), then tighten to back of cabinet.
J
J
6
A
J
J
J
J
J
6
J
J
1
D
D
A
D
2
J
J
J
6
J
8
J
J
J
A
A
D
3
J
J