Manual Settings - BASETech WS-9130-IT Notice D'emploi

Outdoor sensor
• Open the battery compartment.
• Insert 2 AA batteries, observing correct polarity. Follow the polarity signs inside the battery
compartment.
• Close the battery compartment.
Replace the batteries as soon as the battery icon appears on the display above the
outdoor temperature.
Weather station
• Open the battery compartment.
• Insert 2 AAA batteries, observing correct polarity. Observe polarity as indicated inside the
battery compartment.
• Close the battery compartment.
Replace the batteries as soon as the battery icon appears on the display above the
indoor temperature.
c) Manual settings
You can change the following settings manually:
• Time zone
• DCF reception on/off
• Time
To enter manual setting mode, press and hold the SET button until the time zone flashes at the
top of the display.
Time zone
• While the time zone flashes, press the + button to change the value (-12 up to +12 in 1-hour
intervals).
• Press the SET button to confirm.
• The setting for DCF reception flashes.
35