Hard Head 017935 Mode D'emploi page 29

PREPARATIONS
• Keep children and pets at a safe distance from the work area during the installation.
• Carefully unpack the product from the box and remove the polystyrene.
• Remove the plastic bags and covers and carefully place the product so that it is protected from
damage and dirt during the installation.
• Check before installing that you have all the parts in the list. Contact your dealer if any parts are
missing or damaged.
NOTE: The product can unfold unexpectedly during the unpacking.
Tools
• Drill
• Percussion drills, 10 and 14 mm
• Spanners
• Tape measure
• Chalk or marker pen
• Wooden mallet
Step 1: Choose the installation area
Choose the installation area carefully to ensure safe and problem-free installation. Check that the wall
is smooth, so that the brackets can be fitted securely.
Step 2: Drill holes and fit the wall bracket.
wall
INSTALLATION
Mark out and drill holes for the wall bracket.
Measure out and mark the positions of the
brackets on the wall.
See diagram for installation dimensions.
Drill holes at the marked points with a 10 mm
percussion drill. The holes should be 4.5 cm
10 mm
deep.
percussion drill
EN
29