Toolland TC 78073 Mode D'emploi page 7

TC 78073
appliance automatically when it notices a
malfunction. In this case you must switch off
the appliance and pull out the supply cord.
After a short period of cooling down, the
appliance will be ready to use again.
When this happens repeatedly you must
contact your local dealer.
IP CLASSIFICATION
This appliance has an IP.44 classification. It
offers protection against splashing water and
objects with a diameter of at least 1mm.
TECHNICAL SPECIFICATIONS
Voltage
Frequency
Power
Thermostat
IP Protection
Capacity
MAINTENANCE

Before cleaning the appliance disconnect
it from the socket and let it cool down.
The enclosure is easily to get dirty. Wipe
it often with a sponge. For every dirty
parts wipe with a sponge dipped in water
and mild detergent. Then dry the heater
enclosure with clean cloth.

Be careful and do not let water enter the
appliance. Don not splash water onto the
heater, never use solvents like gasoline,
isoamyl, acetate toluene etc. to clean the
heater, in order to protect the enclosure.

Clean the cord and plug. Pack it dry in a
plastic bag and store it in a dry and
ventilated place.
ENVIRONMENT
Should your machine need replacement after
extended use, do not put it in the domestic
waste, but dispose of it in an environmentally
safe way.
WARANTY
Refer to the enclosed guarantee conditions
for the terms and conditions of guarantee.
www.toolland.eu
V 230
Hz 50
W 3000
°C 0-40
IP 44
m³/u 260
Nederlands
7