Publicité
Les langues disponibles
Les langues disponibles
NOTE: Continuous use in variable speed range is not recommended. It may damage
the switch and should be avoided.
BUILT-IN LED LIGHT
A built-in LED light can illuminate the work area and improve vision when Tightening
/ Loosing the Nuts / Bolts in the areas with insufficient light.
FORWARD / REVERSE LEVER
A forward/reverse lever determines the direction of the tool and also serves as a lock
off button. To select forward rotation, RELEASE THE VARIABLE SPEED SWITCH
(see Fig. 7A), and depress the forward/reverse lever (see Fig. 7B), toward left side of
the tool. To select reverse, depress the forward/reverse lever, toward right side of the
tool. The center position of the control button locks the tool in the off position. When
change the position of the lever, making sure the trigger is released.
NOTE: The first time the tool is run after changing the direction of rotation, you may
hear a click on start up. This is normal and does not indicate a problem.
1English1
A
Fig.5
Fig.6
English
LED lights built in the
front of the two side.
-13
Publicité
