Connection Examples - Roland EDIROL UM-3EX Mode D'emploi

Connection examples

■
Connecting two UM-3EX units
fig.double-e.eps_67
Connect to the USB connector
of your computer.
Connect to the UM-3EX
connector of the first unit
(MASTER).
MODE select switch and UNIT number select switch settings
MODE select switch
UNIT number select switch
* Don't change the setting of the MODE select switch or UNIT number select switch while the UM-3EX
is connected to your computer. You must first disconnect the UM-3EX from your computer. Then, after you've
changed the settings of its switches, you can reconnect it to your computer.
44
Set this to
Set this to
1.
MASTER.
• Select the MASTER setting for the UM-3EX that's connected to
the computer.
• Select the SLAVE setting for UM-3EX unit that is connected to
the UM-3EX connector.
• Set the first unit to 1.
• Set the second unit to 2.
First unit
Set this to Set this to
SLAVE. 2.
Second unit