Safety Instructions - Hilti HIT-HY 150 MAX-SD 1400 Jumbo Mode D'emploi

HIT HY 150 MAX-SD - 1400 Jumbo_420496:HIT HY 150 MAX-SD Jumbo
Hilti HIT- HY 150 MAX-SD / 1400 Jumbo
Apply designed load/torque after" t cure" has passed, and the fixture to be attached
has been positioned. See table 12.
Partly-used foil packs must be used up within one week. Leave the foil pack with the mixing
nozzle attached in the dispenser and do not retract the pistons! Remove the air pressure hose
and store under the recommended storage conditions. If reused, attach a new mixer and
discard the initial quantity of anchor adhesive as described by point 8.

Safety instructions:

For industrial use only. Keep out of the reach of children.
See the Material Safety Data Sheet for this product before handling.
Caution: Irritating to eyes and skin. May cause sensitization in
susceptible individuals.
Contains: dibenzoyl peroxide.
Precautions: Avoid contact with skin/eyes. Always wear impermeable
gloves and eye protection when using product. Store in a cool,
dry area. Keep from freezing. Do not store in direct sunlight.
First Aid: Eyes - Immediately flush with water for 15 minutes,
contact a physician. Skin - Wash with soap and water. launder conta-
minated clothing before reuse. If irritations occurs, contact physician.
Ingestion - Do not induce vomiting unless directed by a physician. Contact a physician immediately.
Inhalation - Move to fresh air, give oxygen if breathing is difficult. contact a physician if symptoms persist.
Ingredient
Part A: (Large side)
NJ Trade Secret Registry
Quartz Sand
NJ Trade Secret Registry
NJ Trade Secret Registry
NJ Trade Secret Registry
Amorphous silica
NJ Trade Secret Registry
NJ Trade Secret Registry
NJ Trade Secret Registry
* NJ TSNR = New Jersey Trade Secret Registry Number
In Case of Emergency, call Chem-Trec:
En cas d'urgence, téléphoner Chem-Trec:
En Caso de Emergencia, Ilame Chem-Trec:
Made in Germany
Net contents: 47.3 fl. oz (1400 ml)
Warranty: Refer to standard Hilti terms and conditions of sale for warranty information.
Failure to observe these installation instructions, use of non-Hilti anchors, poor or questionable concrete conditions,
or unique applications may affect the reliability or performance of the fastenings.
Printed: 30.03.2015 | Doc-Nr: PUB / 5222398 / 000 / 00
CAS Number
No. 19136100-5001
14808-60-7
No. 19136100-5003
No. 19136100-5004
No. 19136100-5005
67762-90-7
No. 19136100-5002
No. 19136100-5017
No. 19136100-5019
1-800-424-9300 (USA, P.R., Virgin Islands, Canada)
1-800-424-9300 (USA, P.R., Virgin Islands, Canada)
001-703-527-3887 (other countries/autres pays/otros países)
Ingredient CAS Number
Part B: (Small side)
Quartz Sand 14808-60-7
Water 07732-18-5
Dibenzoyl peroxide 00094-36-0
Aluminum oxide 01344-28-1
Amorphous silica 07631-86-9
1,2,3-Propantriol 00056-81-5
Net weight: 88.2 oz (2500 g)
12.02.2010 11: