Ecler EDRIVE 600 Manuel Utilisateur page 17

Parametric Equalisation
Eight sections of equalisation are provided in a similar format to the input channel equalisation;
two shelving filters and six parametric.
• Knob A: Frequency, 10.0Hz to 25.6kHz in variable steps
• Knob B: Slope, 6 to 12dB / octave in 1dB steps
• Knob C: Gain, +/-15dB in 0.2dB steps
The frequency is specified as point where the filter deviates by 3dB from the gain value.
• Knob A, Centre Frequency, 10.0Hz to 25.6kHz in variable steps
• Knob B, Width, display selectable, Q or BW (Bandwidth)
BW adjustable from 0.05 to 5 octaves in variable steps
Q adjustable from 14.2 to 0.2 in variable steps
• Knob C, Gain, +/-15dB in 0.2dB steps
Limiters
• Knob A: Threshold, -40dBu to 20dBu in 0.2dB steps
A high performance, low distortion limiter is provided on each output. Threshold is user
adjustable; all other parameters are carefully calculated dependant on configuration to provide clean and
effective control of signal dynamics.
17