dji RONIN Guide De L'utilisateur page 6

• Do not use a DC power source over 26V.
• Ensure all the connections are correct.
• Cover all live power leads with insulated tape.
• Operate the Auxiliary Power Adapter in a proper way, users take full
responsibility for all operations and usage.
3. Press and hold the power button to turn the Auxiliary Power Adapter on/off. When
switched on, an LED will light up indicating that the Auxiliary Power Adapter is
supplying power for the gimbal.
4. Mount a Ronin Intelligent Battery Power Distributor before mounting the Auxiliary
Power Adapter if you need to power the gimbal and camera simultaneously. Install as
shown below.
If the gimbal motors stall when using the Auxiliary Power Adapter power gimbal
and camera simultaneously, the Auxiliary Power Adapter's output voltage may
be too low for normal operation.
Specifications
Input Voltage
Output Voltage
Output Current
Operating Temperature
This content is subject to change.
Download the latest version from
http://www.dji.com/ronin-mx
RONIN is a trademark of DJI.
Copyright © 2017 DJI All Rights Reserved.
DC12 V~26 V
14 V
≤10 A
5˚ to 122˚ F (-15˚ to 50˚ C)