F.F. Group CID 12V/80 PLUS Notice Originale page 8

8 | English
LITHIUM-ION MATERIAL DATA SHEET
As a substance under normal conditions of use it is
f
not considered a hazard to health. In the event of
accidental release, measures to prevent spread must
be adhered. Do not contaminate rivers, waterways or
drains.
Composition of lithium-manganese, lithium-cobalt
f
and lithium salt as the organic solvent electrolyte
(nonaqueous liquid).
Hazardous Decomposition: None during normal
f
operating conditions. If cell is ruptured hydrogen
fluoride and carbon monoxide may be released.
PRODUCT SPECIFICATIONS
INTENDED USE
This cordless drill is designed for use with a variety of
drill bits, intended for boring holes in wood, plastic,
metal etc. It is intended for domestic and light commer-
cial use only. Any other application is considered misuse.
TECHNICAL DATA
Article number
Model
Drill Capacities:
Wood
Mild Steel
Masonry
Maximum Torque
Revolutions Per Minute
(no load)
Impact Rate
Chuck Capacity
Spindle Thread
Weight (drill & battery)
Sound emission values determined according
to EN 60745-1
Typically the A-weighted noise levels of the product
are:
Sound pressure level
Sound power level
Uncertainty K
Vibration total values a
and uncertainty K determined according to
EN 60745-1
Vibration Level
a
h
K
41306
CHD 12V PLUS
mm 22
mm 10
mm 10
Nm 30
min 0-400/
-1
0-1.300
i/min 0-6000/
0-19500
mm 10
unf 3/8" x 24
kg 1,02
dB(A) 83,1
dB(A) 94,1
dB 3
(triax vector sum)
h
m/s 9,56
2
m/s 1,5
2
Battery:
Type
Voltage
Rating
Charging time (80%)
Charging time (100%)
Charger:
Rated Voltage
Rated Frequency
Rated Power Input
Rated D.C. Output
Voltage
Rated D.C. Output
Current
IDENTIFICATION
1. Variable speed trigger switch
2. Forward/Reverse selector
3. 10mm Keyless chuck
4. Torque collar
5. Hammer Rotary selector
6. 12V, 2.0Ah Li-ion battery pack (x2)
7. Led work light
8. Speed selector
9. Battery charge indicator
10. Belt clip
UNPACKING & CHECKING
PACKAGING
Carefully remove the cordless drill from the packag-
ing and examine it for any sign of damage that may
have happened during shipping. Lay the contents
out and check them against the parts shown below.
If any part is damaged or missing; please contact the
Customer Service Department and do not attempt
to use the drill. The packaging material should be re-
tained at least during the guarantee period: in case
the machine needs to be returned for repair.
Warning! Some of the packaging materials used
may be harmful to children. Do not leave any of
these materials in the reach of children.
If any of the packaging is to be thrown away, make
sure they are disposed of correctly; according to lo-
cal regulations.
WHATS IN THE BOX
As well as the cordless rotary drill; there are parts
not fitted or attached to it.
• (11) one hour fast charger 2.0A
• (12) spare 12V, 2.0Ah battery
BASIC CORDLESS ROTARY DRILL OPERA-
TIONS
BATTERY CHARGING
Check the mains voltage. Make sure the voltage of
the power source is the same as the voltage speci-
CHD 12V PLUS
Li-Ion
V 12
Ah 2,0
min 60
min 75
V 100-240
Hz 50/60
W 35
V DC 12
A 2,0