SilverCrest 297903 Mode D'emploi Et Consignes De Sécurité page 19

measurements with the date and time and request them
later on.
Configure the date, Bluetooth
Insert the batteries, or press the SET button
5 seconds for batteries that have already been inserted.
Configure the 12-hour or 24-hour mode using the +
button. Press the SET button
The year will flash.
Configure the year using the + button. Press the SET
button
6
The month will flash.
Configure the month using the + button. Press the SET
button
6
Configure the day, hour and minute consecutively as
described above. Press the SET
each entry.
The Bluetooth
„On" or „Off" will flash at the same time.
Using the function buttons „-/+" choose whether you
want to activate („On" flashes) or deactivate („Off
flashes") Bluetooth
button
6
If Bluetooth
automatically after the measurement has been taken.
Note: The battery life is reduced by transfer via
Bluetooth
®
to confirm.
to confirm.
symbol will be shown on the display.
®
data transfer. Press the SET
®
to confirm.
is activated („On") data transfer will begin
®
.
and time as follows:
®
to confirm.
6
button to confirm
6
for over
6
7
GB/IE/NI 19