Tivoli Audio Music System+ Manuel Utilisateur page 14

Bluetooth Operation
Prior to pairing, verify your device supports Bluetooth and your device is not connected to any other
Bluetooth product. Devices may pair differently. Below is a general guide.
1. Turn on the Music System+ to the Auxiliary position. This will power on the Bluetooth. Turn the
volume up about ¼ to start. Also turn up the volume on the source device (the device you are
streaming from).
2. Turn on the Bluetooth wireless technology on your enabled device.
3. Select "Tivoli Bluetooth (Not Paired)" when it appears on your device's screen to initiate
searching. Some devices may prompt you for a PIN. If so, enter "0000". "Tivoli Bluetooth" will
change from "Not Paired" to "Connected".
4. You will hear a ring tone from the Music System+ confirming connection and you can begin
playing your music files wirelessly. Adjust the volume level on your device. You should not have
to pair your device again. Depending on your device, you may need to make multiple
attempts at Pairing and/or Connecting to the Music System+, but please give your device
adequate time to Pair or Connect before repeating the process.
Reception/RDS
The internal DAB/FM antenna will provide good reception. The supplied external DAB/FM antenna
will usually provide improved reception. Fully extend the antenna. If a noisy FM station is received,
setting the Audio button to "Mono" may help to clear up some of the multiplex noise.
The Radio Data System (RDS) transmits text information along with audio broadcasts. Program
Service data will be shown in the upper right corner when available. Not all FM stations utilize RDS,
thus text data may not be present with some stations. For stations using RDS, text may not appear
or may appear scrambled if the signal is too weak. Experimenting with the FM antenna position
may improve RDS reception. RDS content is determined by each individual FM station, therefore if
any data is shown incorrectly, this is not a fault of the unit. There are also limitations in terms of the
kinds of characters that can be displayed. Therefore it is not unusual to see a different character or
blank space in cases where the precise character can't be reproduced. Note RDS text will not be
displayed in Sleep mode.
Buildings made with concrete, steel, or aluminum siding will hinder reception. Household appliances,
electric blankets, computers, and other electronic devices can also adversely affect reception or
inject noise. If you experience this, move the Music System+ further from the offending device or
plug it into an electrical outlet not shared by another device.
Placement
Place the Music System+ on a solid, flat, stable surface strong enough to support its weight.
Placement in a bookcase, cabinet, or close to walls or corners may inflate the bass, creating an
unnatural sound. Do not obstruct the vents on the rear panel, as these are for sound as well as
internal heat ventilation.
The CD player built-into the Music System+ has excellent shock protection, but it is not shock
proof. We therefore recommend the Music System+ be placed on a flat, level surface that is not
subject to vibration.
The Music System+ is shielded and may be placed near or below a TV or computer monitor.
14 – ENGLISH