Technical Specifications Of Mach 45 Uni; Options; Guarantee - Cassese MACH 45 UNI Mode D'emploi

USER MANUAL
Z1791:
Green round clamp
1.D

TECHNICAL SPECIFICATIONS OF MACH 45 UNI

Minimum moulding width:
Maximum moulding width :
wedge types :
Machine gross weight :
Dimensions :
Power supply:
Air Supply :
Average consumption per cycle :
1.E

OPTIONS

Z25147:
Stainless steel shelf for
wedges and accessories
1.F

GUARANTEE

One year guarantee for parts and labor against manufacturing defects. Wearing parts* and those damaged as a
result of non-appliance with the instructions of the present manual are excluded from the guarantee.
*Chevron rubbers, round clamps and wedge driver blades are considered as wearing parts.
Z1783:
Yellow round clamp
) / Maximum moulding height : 10
Maximum stroke between first and last wedge (at 45°) : 190
5, 7, 10, 12 and 15 mm (5mm wedges can be fired with 7mm stapling head)
for
97 kg .
110/230V, 50/60 Hz, single-phase, Consumption : 500W.
compressed air 6-7 bars
2 Nl at 6 bars (we consider one cycle is a corner with 2 positions and 1 wedge per position)
Barcode reader (Contact
the customer service )
Barcode reader (Contact the
MACH 45 UNI
9