Ichanging Wedges Size - Cassese MACH 45 UNI Mode D'emploi

USER MANUAL
4.I CHANGING WEDGES SIZE
Allen key N. 2,5
To load the machine,
rotate the loading
button in the load
position.
The wedge pusher
will move back.
Using the 2.5mm
Allen key, unlock the
holding screw of the
head and remove the
head.
Select the head
according to the size
you wish to employ
and install it.
Lock the holding
screw of the head.
Load the strip of
wedges and turn
back the loading
button to off.
Unlock the
table and open it to
its wider capacity.
Figure 4-24
Using the Allen key
of 2.5mm, extract the
eventual
wedges of the head.
Figure 4-26
Pay attention to the
way the wedges are
introduced.
Figure 4-28
Figure 4-30
sliding
remaining
MACH 45 UNI
Figure 4-25
Figure 4-27
Figure 4-29
20