PNI CT400 Manuel De L'utilisateur page 4

EN
TECHNICAL DETAILS / SPECIFICATIONS
- Main unit power supply: 2 AAA batteries
- Receiver power supply: 230VAC 50 / 60Hz
- Receiver unit command type: 2 x NO/NC Relay (normal open/close)not energized / dry contact
- Relay parameters: 250 V max, 10 Amps max (rezistiv), AC/DC curent
- Set point range temperature: 5 - 35
- Measurable ambient temperature: 0 - 50
- Temperature measurement unit: only
- Acceptable humidity: 85% no condensation
- Screen illumination: white light
- Temperature sensor: NTC 10K, 3950ohms at 25°C
- Sensor accuracy: ± 0.1 °C (0.5 °C step sensor calibration)
- Protection degree: IP30
- Housing: ABS with UL94-5 fire retardant plastic standard
- WiFi connectivity: 802.11 b / g / n (2.4 GHz); WPA2 (TKIP and AES)
- RF frequency connectivity between units: 868 MHz
- Smartphone Compatibility: Minimum iOS 9 / minimum Android 4.2
MAIN UNIT DESCRIPTION
Weekday
Clock
Set. Temperature
RECEIVER DESCRIPTION
Multifunctional LED
° °
C (0.5 C step)
° C (0.1 ° C step)
o Celsius degrees
PRG. Button On/Off Button
Modes Select
Pairing Button
4
Temperature and parameter settings
Wireless signal
OWD Icon
Room Temperature
Heating Icon
Programable Period