Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
6
INSTALLATION
6.1
Shipping the SB28
The optional L-ACOUSTICS
the two captive dolly board pins in the front locator studs (see Figure 3) thus allowing easy transportation and
protection of the enclosure.
!
L-ACOUSTICS
board and the L-ACOUSTICS
SB28 enclosure.
IMPORTANT
6.2
Stacking or flying the SB28
The SB28 rigging system allows system setups in flown or stacked configurations such as:
•
Flying vertical array (available as a future development).
•
Stacking vertical array of up to 6 SB28 enclosures using the fully integrated stacking runners and runner
guides (see Figure 3).
!
A maximum of six SB28 enclosures can be stacked one on one so as to build a vertical array.
Secure each array with a ratchet strap or any other suitable materials.
WARNING
6.3
Connecting speakers
The SB28 enclosure is driven and powered by the dedicated amplified controller L-ACOUSTICS
amplification channel can drive one SB28 enclosure. Channel assignment varies upon the preset selected by the user for
a given application. For more details please refer to the ''LA8'' user manual also available on the L-ACOUSTICS
internet website @ www.l-acoustics.com.
The SB28 enclosure is equipped with one 4-point Speakon
amplified controller (Figure 4) L-ACOUSTICS
conjunction with one of the DO.7, DO10, or DO25 cables.
!
A maximum of one SB28 enclosure can be connected per LA8 output channel.
IMPORTANT
The L-ACOUSTICS
®
wiring convention is as follows:
SB28_UM_ML_1.1
®
SB28PLA dolly board (see Figure 2) can be secured to the SB28 enclosure by inserting
recommends using the L-ACOUSTICS
®
SB28COV protective cover (see Figure 2) for shipping the
®
®
recommends using the L-ACOUSTICS
Speakon
®
connector labels
1+
1-
2+
2-
w w w . l - a c o u s t i c s . c o m
SB28PLA removable front dolly
®
®
connector. To connect the SB28 enclosure to the LA8
Connections to transducer
IN +
IN -
Not used
Not used
®
LA8. Each LA8
®
®
DOSUB-LA8 cable in
9 en
EN
Publicité
Chapitres
Table des Matières
